ปากกาต่อลายวงจร หลอดเล็กพร้อมหัวเข็มสำรอง 2 หัว

เป็นปากกาที่ใช้สำหรับต่อลายวงจรที่ขาด หลอดเล็ก ปลายเข็ม ใช้งานง่าย สะดวก พร้อมหัวเข็มไว้เปลี่ยนอีก 2 หัว

Product Name : good silver paint was silver! High concentration of high-quality printing of quick-drying type conductive silver paint conductive adhesive repair keyboard cable

Product categories : chip-level maintenance tools - laptop repair tools

Product Description : 

Great as overclocking the use of thermal grease effect

Note: Conductive silver paint needle is convenient to the seller when the packaging, the needle of the syringe, it is easy to suspect knot, remember not to be used directly with a needle during use, remove the needle, extruded conductive silver paint point needles or fine items, click on the small amount of conductive silver paint, you can connect to, pay attention to draw a line in the disconnection at: Line after, we have to wait until the conductive silver paint dry conductive, ordinary conductive silver paint naturally dry a long time, several hours, quick-drying type conductive silver paint shop launch, a good solution to this problem.     

Place used to fix some inconvenient welding wire such as repair keyboard or some soft wire is very small like .. 

Features: 1) has excellent electromagnetic shielding effect. 
          2) excellent adhesion to plastic substrate, such as ABS, PC, ABS / PC. 
          3) 100% Silver powder medium, with excellent conductive properties. 
          4) excellent wear resistance. 
          5) excellent moisture resistance. 
          6) excellent drying properties. 
          7) film performance, no powder from the phenomenon, the film hard durable. 
          8) the product is not easy precipitation stratification workability. 

Technical data :
solid powder 60-80% 
the proportion of 25℃ 1.46-1.48g/cm3 
resistance <0.02 ohm / sq film thickness of 12 microns 
viscosity> 20000CPS 
shielding effectiveness> 80dB 
Recommended dry film thickness of 12-16 microns 
Recommended thinner days that water 
diluted with ethanol than the conductive paint: thinner = 1:0.7-0.8 
humidity environment test (by weight) 85°C / 85% relative humidity for seven days resistance value constant 
drying conditions are 60° C for 20 minutes (with a hair dryer or hot air the gun heat curing faster)